A running pace chart turns a finish-time goal into a practical pace for your watch, workouts, and race plan. Use the tables below to convert minutes per mile or kilometer into estimated 5K, 10K, half marathon, and marathon times, then adjust the result for your current fitness, course, weather, and effort.
Overview
Your required race pace is calculated by dividing the target finish time by the race distance. The result is an average: it does not account for water stops, hills, GPS variation, congestion, or the small difference between the advertised distance and the distance recorded on your watch.
For reference, this article uses these standard distances:
- 5K: 5 kilometers or about 3.107 miles
- 10K: 10 kilometers or about 6.214 miles
- Half marathon: 21.0975 kilometers or about 13.109 miles
- Marathon: 42.195 kilometers or about 26.219 miles
Use a running pace calculator when you need an exact target, but keep a rounded pace in mind for training. For example, a goal of 1:59:00 for a half marathon requires approximately 9:05 per mile or 5:39 per kilometer. A watch may show a slightly different number because GPS tracks a route rather than the certified course line.
Running pace chart: minutes per mile
| Pace | 5K | 10K | Half marathon | Marathon |
|---|---|---|---|---|
| 7:00/mi | 21:45 | 43:30 | 1:31:42 | 3:03:28 |
| 8:00/mi | 24:51 | 49:43 | 1:44:44 | 3:29:32 |
| 9:00/mi | 27:58 | 55:55 | 1:58:00 | 3:55:58 |
| 10:00/mi | 31:04 | 1:02:08 | 2:11:06 | 4:22:12 |
| 11:00/mi | 34:11 | 1:08:22 | 2:24:13 | 4:48:25 |
| 12:00/mi | 37:17 | 1:14:33 | 2:37:19 | 5:14:38 |
Running pace chart: minutes per kilometer
| Pace | 5K | 10K | Half marathon | Marathon |
|---|---|---|---|---|
| 4:00/km | 20:00 | 40:00 | 1:24:23 | 2:48:47 |
| 4:30/km | 22:30 | 45:00 | 1:34:55 | 3:09:35 |
| 5:00/km | 25:00 | 50:00 | 1:45:30 | 3:30:59 |
| 5:30/km | 27:30 | 55:00 | 1:55:59 | 3:51:13 |
| 6:00/km | 30:00 | 1:00:00 | 2:06:35 | 4:13:10 |
| 6:30/km | 32:30 | 1:05:00 | 2:17:10 | 4:34:16 |
| 7:00/km | 35:00 | 1:10:00 | 2:27:41 | 4:55:22 |
How to estimate your target pace
Start with a recent result rather than an aspirational goal. A race, accurately measured time trial, or hard effort on a mostly flat route gives you a more useful baseline than a pace selected from a chart alone.
- Record the distance and time. Write down the measured distance, elapsed time, conditions, and whether the effort was controlled or all-out.
- Convert the result to pace. Divide total minutes by distance. For instance, 25:00 for 5K is 5:00 per kilometer and about 8:03 per mile.
- Choose the race distance. A short-distance result can help estimate a longer race, but the estimate becomes less dependable when endurance, fueling, or weekly mileage is limited.
- Set a range, not one perfect number. Use a practical target window, such as 8:55–9:05 per mile, so small changes in terrain or GPS readings do not dictate every step.
- Test the pace in training. Include portions at goal pace during a long run or controlled workout. If the pace repeatedly feels too hard early, revise the goal before race day.
For training, do not use race pace for every run. Easy runs should feel conversational, long runs should generally remain controlled, tempo running should feel comfortably hard and sustainable for a defined block, and intervals should be faster with recovery between repetitions. Effort and heart rate can be more useful than pace when the route is hilly or the weather is difficult. The running pace calculator guide can help organize these training ranges.
Inputs and assumptions
A pace chart is only as useful as its inputs. Check the following before treating a predicted finish time as a race plan:
- Fitness and recent training: A result from several months ago may not represent your current ability. Conversely, a recent breakthrough may not yet reflect the endurance needed for a longer race.
- Course profile: A flat-road pace does not transfer directly to a hilly or technical course. On climbs, shorten your stride and manage effort; regain time gradually on runnable descents rather than sprinting.
- Heat, humidity, wind, and altitude: These conditions can make a familiar pace feel substantially harder. Use perceived effort or heart rate to cap intensity, and treat the chart as a cool-condition reference rather than a demand.
- Distance measurement: GPS watches can record long or short, especially around turns, buildings, and tree cover. For interval work, a measured track or marked route may provide more reliable splits.
- Race execution: Starting too quickly can turn a reasonable average pace into a difficult second half. Aim for an even effort and allow the first mile or kilometer to feel restrained.
For a more complete performance picture, pair pace with heart rate, perceived effort, elevation, and recovery. A heart rate zone training guide explains how to use those signals when pace is affected by terrain or temperature.
Worked examples
Example 1: Choosing a 10K target
Suppose you recently ran a 5K in 28:00, or 5:36 per kilometer. Doubling that pace would suggest about 56:00 for 10K, but it may be aggressive if you have not trained consistently at longer distances. A sensible process is to test controlled efforts near 5:45–5:55 per kilometer in training, then select a 10K goal based on how those efforts feel and how well you recover.
Example 2: Converting a half-marathon goal
A 2:00:00 half marathon requires approximately 9:09 per mile or 5:41 per kilometer. Use that as the average race pace, not necessarily the pace for the opening kilometer. A practical race plan could begin slightly slower, settle near target pace through the middle, and reserve any increase for the final section if effort remains controlled.
Example 3: Adjusting a marathon plan
A 4:30:00 marathon requires approximately 10:18 per mile or 6:24 per kilometer. That pace must be supported by long-run training, recovery, and a fueling plan. If your long runs show rising effort well before the finish, lowering the target is a performance decision, not a failure. Review the fueling and hydration guidance for the practical demands of longer races.
When to recalculate
Revisit your running pace chart whenever your inputs change. Recalculate after a new race or time trial, following a meaningful interruption in training, when weekly mileage or long-run distance changes, or after several weeks of consistent workouts that feel easier at the same pace.
Also recalculate before each race if the course, forecast, or goal distance differs from your original plan. A hot, windy, hilly, or crowded event may call for an effort-based strategy and a wider finish-time range. During a taper, avoid trying to create new fitness; use the period to arrive rested and confirm your intended opening pace. The marathon taper plan provides a framework for reducing training while retaining rhythm.
Before your next workout, write down three numbers: your recent benchmark, your realistic target range, and the effort that should feel sustainable. Take the chart to the route, compare pace with effort and conditions, and update the target after you have better evidence. That simple loop keeps your training metrics useful without letting a single number control the entire run.